MASTER COURSE SYLLABUS

For

AHR 112 : HEATING TECHNOLOGY

COURSE DESCRIPTION

This course covers the fundamentals of heating including oil, gas, and electric heating systems. Topics include safety, tools and instrumentation, system operating characteristics, installation techniques, efficiency testing, electrical power, and control systems. Upon completion, students should be able to explain the basic oil, gas, and electrical heating systems and describe the major components of a heating system.

Prerequisites: DRE 097 or appropriate placement test score.

Corequisites: CTS 080 or appropriate placement test score.

Class Hours: 2        Lab Hours: 4        Clinical/Work Exp.: 0        Credit Hours: 4

STUDENT LEARNING OUTCOMES

  • Service/install an oil tank and fill pipe in accordance with applicable codes with no leaks.

  • Set an oil furnace in a properly prepared location in accordance with applicable codes and the manufacturer’specifications.

  • Connect an oil furnace to a prefabricated or job-erected flue in accordance with applicable codes and the manufacturer’s specifications.

  • Connect an oil furnace to its duct system in accordance with applicable codes and the manufacturer’s specifications.

  • Service/install thermostat and controls in accordance with applicable codes and the manufacturer’s specifications.

  • Service a furnace blower and motor for proper belt tension, motor rotation and speed, lubrication and noise level.

  • Service a furnace high-pressure, gun-type oil burner ignition and combustion system by analyzing combustion efficiency.

  • Service a humidifier for proper water flow and applicable operations with no leaks.

  • Start up and adjust an oil-heating system for efficient and safe operation using the manufacturer’s performance specifications.

  • Diagnose and repair a malfunctioning oil-heating system following a logical, systematic troubleshooting procedure, isolating the malfunction, and making the necessary repair.

  • Set gas furnace in a properly prepared location in accordance with applicable codes and manufacturer’s specifications.

  • Service and install a gas line in accordance with applicable codes.

  • Connect a gas furnace to its duct system in accordance with applicable codes and the manufacturer’s specifications.

  • Service operating and safety controls and a space thermostat for proper calibration and operation, and install a space thermostat in the proper location in accordance with manufacturer’s specifications.

  • Service a gas furnace burner and vent by analyzing combustion efficiency.

  • Start up and adjust a gas-heating system for efficient and safe operation using the manufacturer’s performance specifications.

  • Diagnose and repair a malfunctioning gas-heating control system following a logical, systematic troubleshooting procedure, isolating the malfunction, and making the necessary repair.

  • Set electric heating equipment, and connect it to its duct system in accordance with applicable codes and manufacturer’s specifications.

  • Connect unit wiring to the disconnect in accordance with the applicable codes and the manufacturer’s specifications.

  • Service operating and safety controls and a space thermostat for proper calibrations and operations, and install a space thermostat in the proper location in accordance with manufacturer’s specifications.

  • Service electric furnace heating elements using electrical test instruments to determine the BTU output.

  • Start up and adjust an electric furnace heating system for efficient and safe operation using the manufacturer’s performance specifications.

  • Diagnose and repair malfunctioning electric furnace heating system following logical, systematic troubleshooting procedure, isolating the malfunction, and making the necessary repair.

  • Read and interpret manufacturer’s diagrams to understand logical sequence of gas-fired equipment control events and use test instruments to verify the control’s function.

  • Read and interpret manufacturer’s diagrams to understand logical sequence of oil-heating system control events and use test instruments to verify the control’s function.

  • Read and interpret manufacturer’s diagrams to understand logical sequence of electric heating equipment control events and use test instruments to verify the control’s function.

  • Diagnose a malfunctioning gas-heating control system following a logical, systematic troubleshooting procedure isolating the malfunction, planning, and completing the repair.

  • Diagnose a malfunctioning electric heating control system following a logical, systematic troubleshooting procedure isolating the malfunction, planning, and completing the repair.

  • Diagnose a malfunctioning oil-fired equipment control system following a logical, systematic troubleshooting procedure isolating the malfunction, planning, and completing the repair.

  • Demonstrate safe practices and procedures with tools, materials, and industry accepted test equipment covered in the course. (CCL)

  • Use industry terminology to describe principles for oil, gas, and electric warm air heating systems. (CCL)

  • Identify the major components of oil, gas, and electric heating systems. (CCL)

  • Install and start-up warm air heating systems. (CCL)

  • Identify various types of energy sources used in heating and describe the individual characteristics of each. (CCL)

  • Describe service procedures for heating systems. (CCL)

  • Use tools and instruments necessary to troubleshoot and test system efficiency. (CCL)

GRADING SCALE

A Excellent 4 Grade Points Numerical grade of 90 - 100
B Above Average 3 Grade Points Numerical grade of 80 - 89
C Average 2 Grade Points Numerical grade of 70 - 79
D Below Average 1 Grade Point Numerical grade of 60 - 69
F Failed 0 Grade Point Numerical below 60
WP Withdraw Passing 0 Grade Point Issued if the course is dropped after the
census date and on or before the 50% point
of the course unless the instructor issues
a WF based on extenuating circumstances
WF Withdraw Failing 0 Grade Point Issued if the course is dropped after the
50% point of the course or the instructor
chooses based on extenuating circumstances

ATTENDANCE REQUIREMENT
SCHOOL OF BUSINESS, INDUSTRY, AND TECHNOLOGY

Regular, prompt attendance is essential for academic success. Students should strive for perfect attendance. It is recognized, however, that students may be absent from class occasionally. Students should reference the instructor's syllabus to determine the attendance requirement for this course. The instructor is responsible for enforcing the attendance requirement. It is the student's responsibility to withdraw from the course. Students may complete the withdrawal process in the Advising Center. Students may receive a grade of WP if they withdraw from a course by the 50% point/date of the course. Any student withdrawals that occur after the 50% point will result in a grade of WF. Exceptions to the "WF" grade may exist if the student has a mitigating circumstance. Students are encouraged to discuss withdrawal options with the faculty member and complete the withdrawal process in the Advising Center. Students who come in after the scheduled starting time or students who leave before the scheduled ending time will be counted as tardy. Students should reference the instructor's syllabus to determine the tardy requirement for this course. The instructor is responsible for enforcing the tardy requirement.

ELECTRONIC DEVICE USE STATEMENT

To preserve the best learning environment for all students, all cell phones and other electronic devices must be turned off and stored with other personal property in book bags while class is in session. Ear buds must be removed. If a student uses these devices during class, the instructor will require the student to leave because text messaging and other activities disturb the class and prevent others from concentrating on class work. If a student uses electronic devices during a test or quiz, a zero will be recorded for that assignment, and the instructor may withdraw the student from the course. The use of a phone in any way during a test or the discussion of a graded test is strictly prohibited and considered cheating.

DISABILITY STATEMENT

If you have a documented disability and wish to discuss academic accommodations, please contact Frank Pait, Counselor for Students with Disabilities, at extension 4222, in the Learning Assistance Center (LAC) located on the first floor of the Cuyler A. Dunbar Building (CAD).

If you are a student with a mobility impairment and have a class in a multi-story building, please discuss evacuation plans with your instructor.

RELIGIOUS OBSERVANCE STATEMENT

Students shall be permitted excused absences from all classes two days per academic year for religious observances required by their faith. The absences requested in accordance with this policy are "one of" and not "in addition to" any absences otherwise permitted by the faculty for a class. The excused absence request must be submitted by the second class meeting and a minimum of two (2) weeks in advance of the absence. Please contact your instructor for the required forms.

ACADEMIC HONESTY POLICY

Students at CVCC are expected to be honest in all academic pursuits, whether class, lab, shop, or clinical. Acts of academic dishonesty are considered unethical and subject to behavior sanctions. Examples of academic dishonesty include, but are not limited to the following:

1. Sharing information about the content of quizzes, exams, classroom/lab/shop/clinical assignments (scheduled or make-up) without approval of the instructor including but not limited to unauthorized copying, collaboration, or use of notes, books, or other materials when preparing for or completing examinations or other academic assignments (scheduled or make-up).

2. Buying, selling, or otherwise obtaining a copy of a quiz, exams, project, term paper, or like document, without approval of the instructor.

3. Plagiarism, which is defined as the intentional representation of another person's work, words, thoughts, or ideas (from any source) as one's own.

4. Failing to follow approved test taking procedures by performing such acts as:
  • Looking on another student's test
  • Use of unauthorized notes; written, electronic, or otherwise
  • Changing answers after exam is scored
  • Verbal, non-verbal, or electronic communication with another student during an exam

Instructors have the authority to impose either a warning, probation, or dismissal from the class for acts of academic dishonesty relative to classes under their supervision.

Students have an obligation to report any acts of academic dishonesty to the instructor or appropriate campus authority when reasonable grounds exist for such a report. Students also have a responsibility to cooperate in the investigation of any alleged acts of academic dishonesty. Failure to report acts of academic dishonesty could result in a behavior sanction as outlined in the Student Conduct Policy, Policy 3.18

CVCC EMERGENCY PROCEDURES

To Report a Serious Emergency Dial 911 from any campus phone or 911 from mobile phones; then dial 711 (Campus Safety & Security) from a campus phone.

For specific CVCC emergencies guidelines, please refer to the CVCC Emergency Guidebook

Lockdown

Quickly get all persons behind a locked door, close blinds, lock all windows/doors, and turn off lights. Sit against an interior wall away from windows and doors (hide). Keep cell phones ON in silent mode or vibrate. Do not leave the locked area until notified by a known CVCC administrator or by law enforcement that the emergency is over.

Seek Shelter (tornados, hurricanes, etc.)
Move to hallways and/or other inner rooms. Stay away from windows and doors. Sit on floor facing the inner wall and shield head with hands. Remain in shelter until notified by CVCC administration or by emergency personnel that the danger is over.

Building Evacuation
Leave the building immediately and proceed to a parking lot location at least 300 feet from the building. Do not delay to retrieve books or other personal items. Do not use elevators. Do not touch suspicious objects. Stay clear of the building once outside. Faculty should take class rosters if possible and account for all students at evacuation locations. Report any special assistance needed to CVCC faculty/staff or to emergency personnel. If you are aware or suspect someone is trapped in a threatened building, notify CVCC faculty/staff or emergency personnel. Remain at your building evacuation location until further instructions are provided by CVCC administration or by emergency personnel. In case of bomb threat, avoid using cell phones and wireless devices; this may detonate the bomb.

Smoke, Fire or Hazardous Materials
Activate the nearest fire alarm. Before attempting to fight a fire, notify someone nearby. Never attempt to fight a fire larger than wastebasket size. Close doors and windows to isolate the problem if the situation permits. If trapped in a building during a fire, use wet towels or cloths to protect you from flames and smoke. Stop/drop/roll if your clothes catch on fire. Do not open doors that feel hot. Always stay between the fire and an exit. Stay low to the floor as you try to exit.

Personal Emergencies
Unless you feel threatened, stay with the victim until emergency personnel arrive. Avoid contact with bodily fluids. Stay calm and try to minimize panic. If the person is conscious, ask if he/she is a High School student (if so, include this information in your 911 call).

Emergency Procedures Revised: April 4, 2012


Cell phone backup to 711 Campus Safety & Security:
828-514-7025

Printer Friendly Version of AHR 112